Raspberry Pi

I recently found one piece of this in my garage. Bought two years ago to play with it, but never really had time to do this. As I needed to create tor anonymity box (for running unrestricted WiFi hotspot in my area), I decided to do this on Raspberry Pi (my Linksys WRT54gs has 32MB of RAM which is not enough to run tor software). The very first problem was to configure Debian (called Raspian, which is really Debian ARM Wheezy) on it. I did not wanted connecting this through HDMI, so decided to use serial cable. All you need is to listen with putty on serial port (baudrate of 115200):

Than just connect your Raspberry Pi to RS232-TTL 3.3V:


And finally turn power of Raspberry Pi:

Now, just login using user pi and password raspberry. It is recommended to issue sudo raspi-config after first login to set up various parameters,


Comments

Post a Comment

Popular posts from this blog

Hardening OpenWRT - adding non-root user account

I have at home an OpenWRT on TP-Link 1043ND. As I'm most of the time out of my home, I use this for two functions:  - as reliable WiFi Access Point  - as last resort remote access device  - as a box used to wake up other Ethernet enabled devices @ home. As this box is exposed to Internet via IPv6 address, I decided to harden it a little. 1. Adding extra non privileged user account: root@OpenWrt:~# opkg update root@OpenWrt:~# opkg install shadow-useradd root@OpenWrt:~# mkdir /home root@OpenWrt:~# useradd -D GROUP=100 HOME=/home INACTIVE=-1 EXPIRE= SHELL= SKEL=/etc/skel CREATE_MAIL_SPOOL=no root@OpenWrt:~# useradd -m -s /bin/ash bart root@OpenWrt:~# cat /etc/passwd root:x:0:0:root:/root:/bin/ash daemon:*:1:1:daemon:/var:/bin/false ftp:*:55:55:ftp:/home/ftp:/bin/false network:*:101:101:network:/var:/bin/false nobody:*:65534:65534:nobody:/var:/bin/false bart:x:1000:1000::/home/bart:/bin/ash root@OpenWrt:~# passwd bart Changing password for ...
Read more

Dropbear SSH keys and autossh on OpenWRT

Image
I have a box on Amazon EC2. And I want to have my OpenWRT that is behind IPv4 CGN and have public IPv6 to be reachable from IPv4 Internet. The best idea is to use ssh reverse tunnel connected with autossh to keep connection going. The very first think is to test if I can connect to my Amazon instance from my OpenWRT: root@OpenWrt:~# ssh 54.111.111.111 Host '54.111.111.111' is not in the trusted hosts file. (ssh-rsa fingerprint md5 0f:51:11:11:11:11:11:11:11:11:11:11:11:11:11:11) Do you want to continue connecting? (y/n) y root@54.111.111.111's password: At this point the public key of remote host will be added to .ssh/known_hosts. It is important as we can't have autossh to interact with console in future. root@OpenWrt:~# cat .ssh/known_hosts 2001:1111:1111:1111::1111:1111 ssh-rsa AAAAB3N....... 54.111.111.111 ssh-rsa AAAAB3N.......... Now we need to generate public/private key pair we will be using to connect to our Amazon instance. Invoke fol...
Read more

SSH Tunel with OpenWRT

You need to install OpenSSH client: root@OpenWrt:~# opkg update root@OpenWrt:~# opkg install openssh-client Now OpenSSH client replaced DropBear client: root@OpenWrt:~# ls -l /usr/bin/ssh -rwxr-xr-x    1 root     root        590667 May 24 14:54 /usr/bin/ssh root@OpenWrt:~# ls -l /rom/usr/bin/ssh lrwxrwxrwx    1 root     root            16 Aug 19  2016 /rom/usr/bin/ssh -> ../sbin/dropbear root@OpenWrt:~# ls -l /overlay/upper/usr/bin/ssh -rwxr-xr-x    1 root     root        590667 May 24 14:54 /overlay/upper/usr/bin/ssh Can you spot a difference: root@OpenWrt:~# ssh usage: ssh [-1246AaCfGgKkMNnqsTtVvXxYy] [-b bind_address] [-c cipher_spec]            [-D [bind_address:]port] [-E log_file] [-e escape_char]            [-F configfile] [-I pkcs11] [-i identity_file...
Read more