GL.iNet GL-MT300A all packages in firmware 2.19

The purpose of this post is to retain configuration of manufacturer provided firmware to easilly flash "stocked OpenWRT".

First let's check what packages are installed:
root@GL-MT300A:~# opkg list-installed
base-files - 157.2-r47065
blkid - 2.25.2-4
busybox - 1.23.2-1
chat - 2.4.7-6
comgt - 0.32-25
dnsmasq - 2.73-1
dropbear - 2015.67-1
ethtool - 3.18-1
fcgi - 2.4.0-1
firewall - 2015-07-27
fstools - 2016-01-10-96415afecef35766332067f4205ef3b2c7561d21
gl-inet - 1
hostapd-common - 2015-03-25-1
ip - 4.0.0-1
ip6tables - 1.4.21-1
iptables - 1.4.21-1
iptables-mod-conntrack-extra - 1.4.21-1
iptables-mod-ipopt - 1.4.21-1
iw - 4.3-1
iwinfo - 2015-06-01-ade8b1b299cbd5748db1acf80dd3e9f567938371
jshn - 2015-11-08-10429bccd0dc5d204635e110a7a8fae7b80d16cb
jsonfilter - 2014-06-19-cdc760c58077f44fc40adbbe41e1556a67c1b9a9
kernel - 3.18.27-1-04314c31bed8f992ea845699355da566
kmod-cfg80211 - 3.18.27+2016-01-10-1
kmod-crypto-aes - 3.18.27-1
kmod-crypto-arc4 - 3.18.27-1
kmod-crypto-core - 3.18.27-1
kmod-crypto-hash - 3.18.27-1
kmod-dma-buf - 3.18.27-1
kmod-eeprom-93cx6 - 3.18.27-1
kmod-fs-exfat - 3.18.27+git-20150301-1
kmod-fs-ext4 - 3.18.27-1
kmod-fs-ntfs - 3.18.27-1
kmod-fs-vfat - 3.18.27-1
kmod-fuse - 3.18.27-1
kmod-gpio-button-hotplug - 3.18.27-1
kmod-i2c-core - 3.18.27-1
kmod-ifb - 3.18.27-1
kmod-input-core - 3.18.27-1
kmod-ip6tables - 3.18.27-1
kmod-ipt-conntrack - 3.18.27-1
kmod-ipt-conntrack-extra - 3.18.27-1
kmod-ipt-core - 3.18.27-1
kmod-ipt-ipopt - 3.18.27-1
kmod-ipt-nat - 3.18.27-1
kmod-ipv6 - 3.18.27-1
kmod-leds-gpio - 3.18.27-1
kmod-lib-crc-ccitt - 3.18.27-1
kmod-lib-crc-itu-t - 3.18.27-1
kmod-lib-crc16 - 3.18.27-1
kmod-mac80211 - 3.18.27+2016-01-10-1
kmod-mii - 3.18.27-1
kmod-mmc - 3.18.27-1
kmod-mt7610e - 3.18.27+p4rev-118062-1
kmod-nf-conntrack - 3.18.27-1
kmod-nf-conntrack6 - 3.18.27-1
kmod-nf-ipt - 3.18.27-1
kmod-nf-ipt6 - 3.18.27-1
kmod-nf-nat - 3.18.27-1
kmod-nf-nathelper - 3.18.27-1
kmod-nls-base - 3.18.27-1
kmod-nls-cp437 - 3.18.27-1
kmod-nls-iso8859-1 - 3.18.27-1
kmod-nls-utf8 - 3.18.27-1
kmod-ppp - 3.18.27-1
kmod-pppoe - 3.18.27-1
kmod-pppox - 3.18.27-1
kmod-rt2800-lib - 3.18.27+2016-01-10-1
kmod-rt2800-mmio - 3.18.27+2016-01-10-1
kmod-rt2800-pci - 3.18.27+2016-01-10-1
kmod-rt2800-soc - 3.18.27+2016-01-10-1
kmod-rt2800-usb - 3.18.27+2016-01-10-1
kmod-rt2x00-lib - 3.18.27+2016-01-10-1
kmod-rt2x00-mmio - 3.18.27+2016-01-10-1
kmod-rt2x00-pci - 3.18.27+2016-01-10-1
kmod-rt2x00-usb - 3.18.27+2016-01-10-1
kmod-sched-connmark - 3.18.27-1
kmod-sched-core - 3.18.27-1
kmod-scsi-core - 3.18.27-1
kmod-sdhci - 3.18.27-1
kmod-sdhci-mt7620 - 3.18.27-1
kmod-slhc - 3.18.27-1
kmod-tun - 3.18.27-1
kmod-usb-acm - 3.18.27-1
kmod-usb-core - 3.18.27-1
kmod-usb-dwc2 - 3.18.27-1
kmod-usb-net - 3.18.27-1
kmod-usb-net-cdc-ether - 3.18.27-1
kmod-usb-net-ipheth - 3.18.27-1
kmod-usb-net-rndis - 3.18.27-1
kmod-usb-ohci - 3.18.27-1
kmod-usb-serial - 3.18.27-1
kmod-usb-serial-cp210x - 3.18.27-1
kmod-usb-serial-option - 3.18.27-1
kmod-usb-serial-wwan - 3.18.27-1
kmod-usb-storage - 3.18.27-1
kmod-usb-uhci - 3.18.27-1
kmod-usb2 - 3.18.27-1
kmod-video-core - 3.18.27-1
kmod-video-gspca-core - 3.18.27-1
kmod-video-gspca-sonixb - 3.18.27-1
kmod-video-gspca-sonixj - 3.18.27-1
kmod-video-gspca-zc3xx - 3.18.27-1
kmod-video-uvc - 3.18.27-1
kmod-video-videobuf2 - 3.18.27-1
libblkid - 2.25.2-4
libblobmsg-json - 2015-11-08-10429bccd0dc5d204635e110a7a8fae7b80d16cb
libc - 0.9.33.2-1
libgcc - 4.8-linaro-1
libimobiledevice - 1.2.0-2
libip4tc - 1.4.21-1
libip6tc - 1.4.21-1
libiwinfo - 2015-06-01-ade8b1b299cbd5748db1acf80dd3e9f567938371
libiwinfo-lua - 2015-06-01-ade8b1b299cbd5748db1acf80dd3e9f567938371
libjpeg - 9a-1
libjson-c - 0.12-1
libjson-script - 2015-11-08-10429bccd0dc5d204635e110a7a8fae7b80d16cb
liblua - 5.1.5-1
liblzo - 2.08-1
libminiupnpc - 1.9-1
libnl-tiny - 0.1-4
libopenssl - 1.0.2g-1
libpcre - 8.37-2
libplist - 1.13-1
libpthread - 0.9.33.2-1
librt - 0.9.33.2-1
libubox - 2015-11-08-10429bccd0dc5d204635e110a7a8fae7b80d16cb
libubus - 2015-05-25-f361bfa5fcb2daadf3b160583ce665024f8d108e
libubus-lua - 2015-05-25-f361bfa5fcb2daadf3b160583ce665024f8d108e
libuci - 2015-08-27.1-1
libuci-lua - 2015-08-27.1-1
libusb-1.0 - 1.0.19-1
libusbmuxd - 1.1.0-1
libuuid - 2.25.2-4
libxml2 - 2.9.2-3
libxtables - 1.4.21-1
lighttpd - 1.4.37-1
lighttpd-mod-access - 1.4.37-1
lighttpd-mod-cgi - 1.4.37-1
lighttpd-mod-expire - 1.4.37-1
lighttpd-mod-fastcgi - 1.4.37-1
lighttpd-mod-proxy - 1.4.37-1
lua - 5.1.5-1
luci - git-15.322.41240-4e44955-1
luci-app-firewall - git-15.322.41240-4e44955-1
luci-app-qos - git-15.322.41240-4e44955-1
luci-app-samba - git-15.322.41240-4e44955-1
luci-app-upnp - git-15.322.41240-4e44955-1
luci-base - git-15.322.41240-4e44955-1
luci-i18n-base-en - git-15.322.41240-4e44955-1
luci-i18n-base-zh-cn - git-15.322.41240-4e44955-1
luci-i18n-firewall-en - git-15.322.41240-4e44955-1
luci-i18n-firewall-zh-cn - git-15.322.41240-4e44955-1
luci-i18n-qos-en - git-15.322.41240-4e44955-1
luci-i18n-qos-zh-cn - git-15.322.41240-4e44955-1
luci-i18n-samba-en - git-15.322.41240-4e44955-1
luci-i18n-samba-zh-cn - git-15.322.41240-4e44955-1
luci-i18n-upnp-en - git-15.322.41240-4e44955-1
luci-i18n-upnp-zh-cn - git-15.322.41240-4e44955-1
luci-lib-ip - git-15.322.41240-4e44955-1
luci-lib-json - git-15.322.41240-4e44955-1
luci-lib-nixio - git-15.322.41240-4e44955-1
luci-mod-admin-full - git-15.322.41240-4e44955-1
luci-mod-rpc - git-15.322.41240-4e44955-1
luci-proto-ipv6 - git-15.322.41240-4e44955-1
luci-proto-ppp - git-15.322.41240-4e44955-1
luci-theme-bootstrap - git-15.322.41240-4e44955-1
miniupnpc - 1.9-1
miniupnpd - 1.9.20150609-1
mjpg-streamer - r182-7
mtd - 21
netifd - 2015-12-16-245527193e90906451be35c2b8e972b8712ea6ab
ntfs-3g - 2014.2.15-1-fuseint
odhcp6c - 2015-07-29-dc186d6d2b0dd4ad23ca5fc69c00e81f796ff6d9
odhcpd - 2015-11-19-01d3f9d64486ac1daa144848944e877e7f0cb762
openvpn-openssl - 2.3.6-5
opkg - 9c97d5ecd795709c8584e972bfdf3aee3a5b846d-9
ppp - 2.4.7-6
ppp-mod-pppoe - 2.4.7-6
procd - 2015-10-29.1-d5fddd91b966424bb63e943e789704d52382cc18
qos-scripts - 1.2.1-7
rpcd - 2015-01-10-f00890cd6eb47ad9bb5da0fb6c50aedc8406e7c5
rt2800-pci-firmware - 2016-01-25-52442afee9907bc32a058f22bb3295d040677c26-1
rt2800-usb-firmware - 2016-01-25-52442afee9907bc32a058f22bb3295d040677c26-1
samba36-server - 3.6.25-5
swconfig - 10
tc - 4.0.0-1
ubox - 2015-11-22-c086167a0154745c677f8730a336ea9cf7d71031
ubus - 2015-05-25-f361bfa5fcb2daadf3b160583ce665024f8d108e
ubusd - 2015-05-25-f361bfa5fcb2daadf3b160583ce665024f8d108e
uci - 2015-08-27.1-1
uci2dat - 1
usb-modeswitch - 2014-08-26-993a9a542791953c4804f7ddbb3a07756738e37a
usbmuxd - 1.1.1-3
usign - 2015-05-08-cf8dcdb8a4e874c77f3e9a8e9b643e8c17b19131
wpad-mini - 2015-03-25-1
zlib - 1.2.8-1
root@GL-MT300A:~#

Now cat of some config files.
root@GL-MT300A:/etc# cat openwrt_version
15.05
root@GL-MT300A:/etc# cat openwrt_release
DISTRIB_ID='OpenWrt'
DISTRIB_RELEASE='Chaos Calmer'
DISTRIB_REVISION='r47065'
DISTRIB_CODENAME='chaos_calmer'
DISTRIB_TARGET='ramips/mt7620'
DISTRIB_DESCRIPTION='OpenWrt Chaos Calmer 15.05'

DISTRIB_TAINTS='busybox override'

root@GL-MT300A:/etc/config# cat network

config interface 'loopback'

        option ifname 'lo'

        option proto 'static'

        option ipaddr '127.0.0.1'

        option netmask '255.0.0.0'

config globals 'globals'

        option ula_prefix 'fc01:2222:1111::/48'

config interface 'lan'

        option ifname 'eth0.1'

        option force_link '1'

        option macaddr '00:00:00:00:00:00'

        option type 'bridge'

        option proto 'static'

        option netmask '255.255.255.0'

        option ip6assign '60'

        option hostname 'GL-MT300A-999'

        option ipaddr '192.168.8.1'

config interface 'wan'

        option ifname 'eth0.2'

        option force_link '1'

        option macaddr '00:00:00:00:00:00'

        option proto 'dhcp'

        option hostname 'GL-MT300A-999'

config interface 'wan6'

        option ifname 'eth0.2'

        option proto 'dhcpv6'

config switch

        option name 'switch0'

        option reset '1'

        option enable_vlan '1'

config switch_vlan

        option device 'switch0'

        option vlan '2'

        option ports '0 6t'

config switch_vlan

        option device 'switch0'

        option vlan '1'

        option ports '1 2 3 4 6t'

root@GL-MT300A:/etc/config# cat wireless

config wifi-device 'radio0'

        option type 'mac80211'

        option path '10180000.wmac'

        option country 'CN'

        option txpower '20'

        option hwmode '11ng'

        option htmode 'HT40+'

        option noscan '1'

        option channel '1'

        option disabled '0'

config wifi-iface

        option device 'radio0'

        option network 'lan'

        option mode 'ap'

        option key 'goodlife'

        option encryption 'psk-mixed'

        option ifname 'wlan0'

        option ssid 'GL-MT300A-999'

        option disabled '0'

And finally dmesg
root@GL-MT300A:~# dmesg
[    0.000000] Linux version 3.18.27 (alzhao@alzhao-ubuntu) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r47065) ) #12 Sat Apr 23 16:00:11 HKT 2016
[    0.000000] Board has DDR2
[    0.000000] Analog PMU set to hw control
[    0.000000] Digital PMU set to hw control
[    0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
[    0.000000] MIPS: machine is GL-MT300A
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x07ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x07ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat 80328290, node_mem_map 81000000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=0006a500
[    0.000000] Readback ErrCtl register=0006a500
[    0.000000] Memory: 126140K/131072K available (2668K kernel code, 127K rwdata, 532K rodata, 184K init, 190K bss, 4932K reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] CPU Clock: 580MHz
[    0.000000] systick: running - mult: 214748, shift: 32
[    0.050000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.060000] pid_max: default: 32768 minimum: 301
[    0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.070000] pinctrl core: initialized pinctrl subsystem
[    0.080000] NET: Registered protocol family 16
[    0.090000] rt2880-pinmux pinctrl: try to register 73 pins ...
[    0.090000] pinctrl core: registered pin 0 (io0) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 1 (io1) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 2 (io2) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 3 (io3) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 4 (io4) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 5 (io5) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 6 (io6) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 7 (io7) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 8 (io8) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 9 (io9) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 10 (io10) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 11 (io11) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 12 (io12) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 13 (io13) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 14 (io14) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 15 (io15) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 16 (io16) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 17 (io17) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 18 (io18) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 19 (io19) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 20 (io20) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 21 (io21) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 22 (io22) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 23 (io23) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 24 (io24) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 25 (io25) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 26 (io26) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 27 (io27) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 28 (io28) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 29 (io29) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 30 (io30) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 31 (io31) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 32 (io32) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 33 (io33) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 34 (io34) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 35 (io35) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 36 (io36) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 37 (io37) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 38 (io38) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 39 (io39) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 40 (io40) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 41 (io41) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 42 (io42) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 43 (io43) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 44 (io44) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 45 (io45) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 46 (io46) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 47 (io47) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 48 (io48) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 49 (io49) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 50 (io50) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 51 (io51) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 52 (io52) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 53 (io53) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 54 (io54) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 55 (io55) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 56 (io56) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 57 (io57) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 58 (io58) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 59 (io59) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 60 (io60) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 61 (io61) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 62 (io62) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 63 (io63) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 64 (io64) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 65 (io65) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 66 (io66) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 67 (io67) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 68 (io68) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 69 (io69) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 70 (io70) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 71 (io71) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 72 (io72) on rt2880-pinmux
[    0.090000] pinctrl core: add 4 pinmux maps
[    0.090000] rt2880-pinmux pinctrl: found group selector 11 for wled
[    0.090000] rt2880-pinmux pinctrl: found group selector 12 for ephy
[    0.090000] rt2880-pinmux pinctrl: found group selector 1 for uartf
[    0.090000] rt2880-pinmux pinctrl: found group selector 0 for i2c
[    0.090000] rt2880-pinmux pinctrl: request pin 72 (io72) for pinctrl
[    0.090000] rt2880-pinmux pinctrl: request pin 40 (io40) for pinctrl
[    0.090000] rt2880-pinmux pinctrl: request pin 41 (io41) for pinctrl
[    0.090000] rt2880-pinmux pinctrl: request pin 42 (io42) for pinctrl
[    0.090000] rt2880-pinmux pinctrl: request pin 43 (io43) for pinctrl
[    0.090000] rt2880-pinmux pinctrl: request pin 44 (io44) for pinctrl
[    0.090000] rt2880-pinmux pinctrl: request pin 7 (io7) for pinctrl
[    0.090000] rt2880-pinmux pinctrl: request pin 8 (io8) for pinctrl
[    0.090000] rt2880-pinmux pinctrl: request pin 9 (io9) for pinctrl
[    0.090000] rt2880-pinmux pinctrl: request pin 10 (io10) for pinctrl
[    0.090000] rt2880-pinmux pinctrl: request pin 11 (io11) for pinctrl
[    0.090000] rt2880-pinmux pinctrl: request pin 12 (io12) for pinctrl
[    0.090000] rt2880-pinmux pinctrl: request pin 13 (io13) for pinctrl
[    0.090000] rt2880-pinmux pinctrl: request pin 14 (io14) for pinctrl
[    0.090000] rt2880-pinmux pinctrl: request pin 1 (io1) for pinctrl
[    0.090000] rt2880-pinmux pinctrl: request pin 2 (io2) for pinctrl
[    0.090000] rt2880-pinmux pinctrl: failed to lookup the sleep state
[    0.090000] pinctrl core: add 1 pinmux maps
[    0.090000] rt2880-pinmux pinctrl: found group selector 8 for pcie
[    0.090000] rt2880-pinmux pinctrl: request pin 36 (io36) for 10140000.pcie
[    0.410000] mt7620-pci 10140000.pcie: PCIE0 no card, disable it(RST&CLK)
[    0.420000] mt7620-pci: probe of 10140000.pcie failed with error -1
[    0.420000] rt2880_gpio 10000600.gpio: registering 24 gpios
[    0.430000] rt2880_gpio 10000600.gpio: registering 24 irq handlers
[    0.430000] rt2880_gpio 10000638.gpio: registering 16 gpios
[    0.440000] rt2880_gpio 10000638.gpio: registering 16 irq handlers
[    0.440000] rt2880_gpio 10000660.gpio: registering 32 gpios
[    0.450000] rt2880_gpio 10000660.gpio: registering 32 irq handlers
[    0.450000] rt2880_gpio 10000688.gpio: registering 1 gpios
[    0.460000] rt2880_gpio 10000688.gpio: registering 1 irq handlers
[    0.460000] Switched to clocksource systick
[    0.470000] NET: Registered protocol family 2
[    0.470000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.470000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.480000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.490000] TCP: reno registered
[    0.490000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.490000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.500000] NET: Registered protocol family 1
[    0.500000] PCI: CLS 0 bytes, default 32
[    0.510000] rt-timer 10000100.timer: maximum frequency is 2441Hz
[    0.510000] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT
[    0.510000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.530000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.530000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.540000] msgmni has been set to 246
[    0.550000] io scheduler noop registered
[    0.550000] io scheduler deadline registered (default)
[    0.560000] ralink-usb-phy usbphy: invalid resource
[    0.560000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.570000] serial8250 serial8250: no of_node; not parsing pinctrl DT
[    0.570000] pinctrl core: add 1 pinmux maps
[    0.570000] rt2880-pinmux pinctrl: found group selector 3 for uartlite
[    0.570000] rt2880-pinmux pinctrl: request pin 15 (io15) for 10000c00.uartlite
[    0.570000] rt2880-pinmux pinctrl: request pin 16 (io16) for 10000c00.uartlite
[    0.570000] console [ttyS0] disabled
[    0.570000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a 16550A
[    0.580000] console [ttyS0] enabled
[    0.590000] bootconsole [early0] disabled
[    0.600000] pinctrl core: add 1 pinmux maps
[    0.600000] rt2880-pinmux pinctrl: found group selector 2 for spi
[    0.600000] rt2880-pinmux pinctrl: request pin 3 (io3) for 10000b00.spi
[    0.600000] rt2880-pinmux pinctrl: request pin 4 (io4) for 10000b00.spi
[    0.600000] rt2880-pinmux pinctrl: request pin 5 (io5) for 10000b00.spi
[    0.600000] rt2880-pinmux pinctrl: request pin 6 (io6) for 10000b00.spi
[    0.620000] m25p80 spi32766.0: w25q128 (16384 Kbytes)
[    0.630000] 5 ofpart partitions found on MTD device spi32766.0
[    0.630000] Creating 5 MTD partitions on "spi32766.0":
[    0.640000] 0x000000000000-0x000000030000 : "u-boot"
[    0.650000] 0x000000030000-0x000000040000 : "u-boot-env"
[    0.650000] 0x000000040000-0x000000050000 : "factory"
[    0.660000] 0x000000050000-0x000000fd0000 : "firmware"
[    0.780000] 2 uimage-fw partitions found on MTD device firmware
[    0.790000] 0x000000050000-0x000000174761 : "kernel"
[    0.790000] 0x000000174761-0x000000fd0000 : "rootfs"
[    0.800000] mtd: device 5 (rootfs) set to be root filesystem
[    0.810000] 1 squashfs-split partitions found on MTD device rootfs
[    0.810000] 0x0000007d0000-0x000000fd0000 : "rootfs_data"
[    0.820000] 0x000000ff0000-0x000001000000 : "art"
[    0.830000] pinctrl core: add 1 pinmux maps
[    0.830000] rt2880-pinmux pinctrl: found group selector 12 for ephy
[    0.830000] rt2880-pinmux pinctrl: request pin 40 (io40) for 10100000.ethernet
[    0.830000] rt2880-pinmux pinctrl: pin io40 already requested by pinctrl; cannot claim for 10100000.ethernet
[    0.840000] rt2880-pinmux pinctrl: pin-40 (10100000.ethernet) status -22
[    0.840000] rt2880-pinmux pinctrl: could not request pin 40 (io40) from group ephy  on device rt2880-pinmux
[    0.850000] ralink_soc_eth 10100000.ethernet: Error applying setting, reverse things back
[    0.860000] gsw: setting port4 to ephy mode
[    0.870000] ralink_soc_eth 10100000.ethernet eth0 (uninitialized): port 0 link up (100Mbps/Full duplex)
[    0.880000] ralink_soc_eth 10100000.ethernet: loaded mt7620 driver
[    0.880000] ralink_soc_eth 10100000.ethernet eth0: ralink at 0xb0100000, irq 5
[    0.890000] rt2880_wdt 10000120.watchdog: Initialized
[    0.900000] TCP: cubic registered
[    0.900000] NET: Registered protocol family 17
[    0.910000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    0.920000] Bridge firewalling registered
[    0.920000] 8021q: 802.1Q VLAN Support v1.8
[    0.940000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[    0.950000] Freeing unused kernel memory: 184K (80342000 - 80370000)
[    3.620000] init: Console is alive
[    3.620000] init: - watchdog -
[    9.560000] usbcore: registered new interface driver usbfs
[    9.570000] usbcore: registered new interface driver hub
[    9.570000] usbcore: registered new device driver usb
[    9.580000] exFAT: Version 1.2.9
[    9.620000] rt2880-pinmux pinctrl: request pin 13 (io13) for pio:13
[    9.620000] rt2880-pinmux pinctrl: request pin 1 (io1) for pio:1
[    9.620000] rt2880-pinmux pinctrl: request pin 2 (io2) for pio:2
[    9.630000] SCSI subsystem initialized
[    9.640000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    9.650000] ehci-platform: EHCI generic platform driver
[    9.660000] phy phy-usbphy.0: remote usb device wakeup disabled
[    9.670000] phy phy-usbphy.0: UTMI 16bit 30MHz
[    9.670000] ehci-platform 101c0000.ehci: EHCI Host Controller
[    9.680000] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
[    9.690000] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[    9.710000] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[    9.710000] usb usb1: no of_node; not parsing pinctrl DT
[    9.710000] hub 1-0:1.0: no of_node; not parsing pinctrl DT
[    9.710000] hub 1-0:1.0: USB hub found
[    9.720000] hub 1-0:1.0: 1 port detected
[    9.720000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    9.730000] ohci-platform: OHCI generic platform driver
[    9.740000] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
[    9.740000] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
[    9.750000] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
[    9.820000] usb usb2: no of_node; not parsing pinctrl DT
[    9.820000] hub 2-0:1.0: no of_node; not parsing pinctrl DT
[    9.820000] hub 2-0:1.0: USB hub found
[    9.820000] hub 2-0:1.0: 1 port detected
[    9.840000] rt2880-pinmux pinctrl: request pin 40 (io40) for pio:40
[    9.840000] rt2880-pinmux pinctrl: request pin 41 (io41) for pio:41
[    9.840000] rt2880-pinmux pinctrl: request pin 72 (io72) for pio:72
[    9.840000] rt2880-pinmux pinctrl: request pin 7 (io7) for pio:7
[    9.850000] MTK MSDC device init.
[    9.890000] mtk-sd: MediaTek MT6575 MSDC Driver
[    9.890000] sdhci: Secure Digital Host Controller Interface driver
[    9.900000] sdhci: Copyright(c) Pierre Ossman
[    9.910000] sdhci-pltfm: SDHCI platform and OF driver helper
[    9.920000] usbcore: registered new interface driver usb-storage
[    9.950000] mmc0: new high speed SDHC card at address 0007
[    9.960000] mmcblk mmc0:0007: no of_node; not parsing pinctrl DT
[    9.960000] mmcblk0: mmc0:0007 SD16G 14.4 GiB
[    9.970000]  mmcblk0: p1 p2
[   10.690000] init: - preinit -
[   11.910000] 8021q: adding VLAN 0 to HW filter on device eth0
[   11.960000] random: mktemp urandom read with 19 bits of entropy available
[   15.350000] jffs2: notice: (373) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   15.370000] mount_root: switching to jffs2 overlay
[   15.410000] procd: - early -
[   15.410000] procd: - watchdog -
[   16.440000] procd: - ubus -
[   17.460000] procd: - init -
[   19.970000] NET: Registered protocol family 10
[   20.000000] ntfs: driver 2.1.31 [Flags: R/O MODULE].
[   20.020000] tun: Universal TUN/TAP device driver, 1.6
[   20.020000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   20.040000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   20.060000] i2c /dev entries driver
[   20.080000] Linux video capture interface: v2.00
[   20.100000] u32 classifier
[   20.110000]     input device check on
[   20.110000]     Actions configured
[   20.110000] Mirror/redirect action on
[   20.130000] nf_conntrack version 0.5.0 (1973 buckets, 7892 max)
[   20.150000] fuse init (API version 7.23)
[   20.160000] usbcore: registered new interface driver cdc_acm
[   20.160000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   20.180000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
[   20.180000] Backport generated by backports.git backports-20151218-0-g2f58d9d
[   20.210000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   20.210000] usbcore: registered new interface driver ipheth
[   20.260000] usbcore: registered new interface driver usbserial
[   20.270000] usbcore: registered new interface driver usbserial_generic
[   20.270000] usbserial: USB Serial support registered for generic
[   20.290000] usbcore: registered new interface driver uvcvideo
[   20.290000] USB Video Class driver (1.1.1)
[   20.330000] xt_time: kernel timezone is -0000
[   20.340000] usbcore: registered new interface driver cdc_ether
[   20.400000] usbcore: registered new interface driver cp210x
[   20.410000] usbserial: USB Serial support registered for cp210x
[   20.420000] gspca_main: v2.14.0 registered
[   20.430000] usbcore: registered new interface driver sonixb
[   20.440000] usbcore: registered new interface driver sonixj
[   20.450000] usbcore: registered new interface driver gspca_zc3xx
[   20.510000] PPP generic driver version 2.4.2
[   20.520000] NET: Registered protocol family 24
[   20.520000] usbcore: registered new interface driver rndis_host
[   20.560000] usbcore: registered new interface driver option
[   20.560000] usbserial: USB Serial support registered for GSM modem (1-port)
[   20.600000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0500 detected
[   20.610000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7620 detected
[   20.620000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   20.620000] usbcore: registered new interface driver rt2800usb
[   25.710000] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   31.670000] 8021q: adding VLAN 0 to HW filter on device eth0
[   31.760000] device eth0.1 entered promiscuous mode
[   31.770000] device eth0 entered promiscuous mode
[   31.800000] br-lan: port 1(eth0.1) entered forwarding state
[   31.800000] br-lan: port 1(eth0.1) entered forwarding state
[   33.800000] br-lan: port 1(eth0.1) entered forwarding state
[   37.900000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   37.920000] device wlan0 entered promiscuous mode
[   37.920000] br-lan: port 2(wlan0) entered forwarding state
[   37.930000] br-lan: port 2(wlan0) entered forwarding state
[   38.060000] br-lan: port 2(wlan0) entered disabled state
[   38.680000] br-lan: port 2(wlan0) entered forwarding state
[   38.680000] br-lan: port 2(wlan0) entered forwarding state
[   38.690000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   39.260000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[   40.680000] br-lan: port 2(wlan0) entered forwarding state
[   58.730000] random: nonblocking pool is initialized